CHILLKING is EnviroFriendly
– All Chillking® chiller brands use environmentally friendly 410a refrigerant
– Use less energy
– Attain 10% above rating on Chillking chillers
– Engineered for simplicity, easy to find ports
– Stainless steel reservoir
– Well-insulated, less heat transfer
It is very important to Chillking that our customers understand the great care and testing that goes into each Chillking. Our chillers draw less power than most of our competitors, while doing so they produce more BTUs. When you compare specs please notice the minimum breaker size and running load amps. Every chiller manufacturer has to use the same formula in calculating these loads. Most Chillking models use 15% to 20% less electricity than most of our competitors. This is very important because this savings alone can pay for your Chillking.
This is very important to you. Every Chillking chiller with a Chillking designed and built evaporator with a stainless steel reservoir of at least 44 gallon per refrigeration circuit must produce 110% of its listed tonnage at a test temperature of 90F ambient with a LWT (leaving water temperature) of 60F. That means if we tell you it is a ten ton chiller it will produce 11 tons. Not only that, the chiller you purchase has been given a BTU load test. Our chillers will not leave the factory without producing plus 10% of it’s rated BTUs. This means when you are comparison shopping, you know that your Chillking chiller will produce more BTUs for less electricity. This is important also because it will reach set point 10% faster, saving even more energy. If it runs 10% less, it will last 10% longer over the years.
EXPERIMENT & DESIGN
We encourage our employees to share ideas. We pay bonuses based on suggestions. If a Chillking employee brings an idea that we patent, it is shared equally when titled. We are constantly fine tuning and trying to increase our performance. Sometimes the smallest change produces great gains. Chillking is always designing new products. Our customers know that they can bring us problems because we have solutions.
Every Chillking is run and load tested before crating for shipping. Each Chillking chiller is also BTU load tested. Our chillers are ETL listed and will soon be EU CE listed. You can count on a Chillking to perform. 2 tons to 200 tons.
How CHILLKING Chillers can benefit your business
From Dry cleaning to National Defense, Chillking Chillers can provide the power and reliability to suit your type of business. Our innovative products are designed to provide reliability and efficiency, helping cut energy costs and making your business more profitable and competitive.
Replace your inefficient chiller:
○ Our condensers are of the highest SEER ratings from 13 to 18 SEER. Greater
efficiency equals greater savings.
○ Stainless steel tank means less maintenance, more durable, longer life.
○ Evaporator in tank means no freeze up compared to brazed plate and tube in tube.
○ Chillking chillers consistently test higher than their rated BTU output, means more reserve, less cycles, and again, greater energy savings. Put existing water-cooled equipment on a Chillking.
○ Reduce water consumption up to 100%. Reuses same water.
○ Documented water savings of $3,000.00 per month and more.
○ Consistent temp means no more adjusting pressure valves.
○ Water/Glycol mix stops corrosion and oxidation.
○ Increases life of your existing equipment.
Protecting the environment and your bottom line
Chillking has made the commitment to provide environmentally friendly and efficient chillers. Condenser coil and evaporator efficiency drastically reduces electrical consumption. Our chillers are designed for and built using the newest environmentally friendly and efficient refrigerants. By reducing the number of remote condensers and converting to water cooled on a Chillking, less copper is used and much less refrigerant, protecting the environment and saving precious resources.
Restaurant Energy Savings
Chillking can instantly produce dramatic energy savings and keep more money in your wallet. Inset above is a chart demonstrating how an average southern fast food restaurant saves money. By being on a Chillking, a dual head ice cream machine uses 5 amps less electricity. Other equipment have similar savings. In addition, A/C systems start to cycle off because the equipment no longer discharges heat into the restaurant, saving even more money. Even with the chillers electrical consumption, most locations will see significant savings.
Features on all Chillking Chillers
○ RANCO® digital temperature controller
○ Copper Chillking® evaporator
○ Evaporator freeze protection
○ Water circuit RTG
○ All welds and solder checked twice
○ Run tested and cataloged
○ Running freeze test on evaporator
○ BTU load test with heated coolant circuit
○ Supervisor quality and procedure checked
○ Stainless steel reservoir
○ -30F – 130F ambient on all models